| About |
|---|
| MonoSol M8630 is a PVOH based thermoplastic film, soluble in cold water and manufactured using MonoSol’s proprietary solution cast technology. MonoSol M8630 film has been specially formulated to be resistant to alkaline hydrolysis. Coupling its rapid cold water solubility and compatibility to alkaline compounds, MonoDose™ M8630 film is an excellent candidate for Detergent and Disinfectant delivery systems. It has good cold crack resistance and can be easily processed on all conventional converting machines. Standard thicknesses are 38 micron (1.5 mil), 51 micron (2.0 mil) and 76 micron (3.0 mil).&& |
| Product Description | |
|---|---|
| Generic | PVOH |
| Material Status | Commercial: Active |
| Features | Alkali resistant,Antifreeze,Biodegradable,Good tear strength,Water soluble |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| water content | |||
| 23℃ | 8.3 | % | |
| solubility | |||
| Disintegration：10℃，76.2 µm | 33.0 | sec | |
| Dissolution：10℃，76.2 µm | 56.0 | sec | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 76 | µm | |
| film thickness | 25 µm, 38 µm, 51 µm, and 76 µm | ||
| Secant modulus | |||
| 100%，MD | 10.3 | MPa | ASTM D882 , ISO 527-3 |
| tensile strength | |||
| MD, fracture | 37.2 | MPa | ASTM D882 |
| MD | 37.2 | MPa | ISO 527-3 |
| Tensile strain | |||
| MD, fracture | 590 | % | ASTM D882 , ISO 527-3 |
| Drop hammer impact | 2200 | g | ASTM D1709 , DIN 53433 |
| Elmandorf Tear Strength – MD | |||
| — | 940 | g | ASTM D1922 |
| — | 0.096 | N | ISO 6383-2 |
| dosage | |||
| 76.2 µm | 9.96 | m²/kg | ASTM D4321 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 50%RH |
| 3. Distilled Water (MSTM 205) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |