| About |
|---|
| Monprene IN-22946DV XRD2 is a high performance thermoplastic vulcanizate used in industrial applications. Monprene IN-22946DV XRD2 is a high hardness, low density, RoHS compliant grade exhibiting excellent UV absorbing characteristics. This grade can be processed by extrusion.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPV |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Low liquidity,Smoothness,Ultraviolet absorption,Good Hardness,Lubricating,Good melt strength,Low density,Good wear resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shore D, 1 second, injection molding | 49 | ||
| Shore D, 5 seconds, injection molding | 47 | ||
| Shore D, 15 seconds, injection molding | 45 | ||
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| TD, fracture | 12.5 | MPa | |
| MD, fracture | 15.0 | MPa | |
| Tensile strain | |||
| TD, fracture | 580 | % | |
| Flow rate, fracture | 490 | % | |
| tear strength | |||
| TD | 140 | kN/m | |
| MD | 65 | kN/m | |
| Compression deformation | |||
| 23℃，22 hr | 38 | % | |
| 70℃，22 hr | 62 | % | |
| 90℃，70 hr | 79 | % | |
| 125℃，70 hr | 97 | % |
| Legal Statement | Nominal value | Unit | Test method |
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 4.0 | g/10min | ASTM D1238 |
| Apparent viscosity of melt | |||
| 200℃，206 sec^-1 | 320 | Pa·s | ASTM D3835 |
| Process Conditions | |||
|---|---|---|---|
| Squeeze description | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 166 to 204 | °C | |
| Barrel 2 zone temperature | 171 to 210 | °C | |
| Barrel 3 zone temperature | 177 to 216 | °C | |
| Barrel 4 zone temperature | 177 to 216 | °C | |
| Barrel 5 zone temperature | 182 to 221 | °C | |
| Nozzle temperature | 190 to 227 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type 1, 20 in/min |
| 3. Method Ba, Angle (Unnicked), 20 in/min |
| 4. Type A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |