| About |
|---|
| Monprene® OM-12252是一种热塑性弹性体(TPE)材料,。 该产品在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货,加工方式为:注射成型。 Monprene® OM-12252的主要特性为:通过 ROHS 认证。 典型应用领域包括: 手柄 工程/工业配件 电气/电子应用 电气用具 工具&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.02 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 10 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 45 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 3.79 | MPa | ASTM D412 |
| 300% strain | 3.45 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 400 | % | ASTM D412 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Adhesion to ABS | |||
| Adhesion to PC | |||
| Adhesion to PC/ABS |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 65.6 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Barrel rear temperature | 204 to 232 | °C | |
| Barrel middle temperature | 210 to 232 | °C | |
| Barrel front temperature | 216 to 238 | °C | |
| Nozzle temperature | 221 to 243 | °C | |
| Processing (melt) temperature | 221 to 243 | °C | |
| Mold temperature | 23.9 to 60.0 | °C | |
| Injection pressure | 1.38 to 6.89 | MPa | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |