| About |
|---|
| Monprene RG-55482 is a high performance thermoplastic elastomer, available in NAT and colors, specifically designed for regulated applications including food contact packaging products. Monprene RG-55482 is a high hardness, low density grade with excellent organoleptic properties and is suitable for injection molding and extrusion. Monprene RG-55482 complies with various US FDA and European regulations and directives for food contact. Please contact Teknor Apex for a regulatory compliance letter.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Dimensional Stability,Good Hardness,Halogen free,Food contact compliance,Good bond,Good melt strength,Good sensory characteristics.,Low density,Good coloring,Agglomerability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.910 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 2.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 1 second, injection molding | 84 | ||
| Shore A, 5 seconds, injection molding | 82 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 7.45 | MPa | ASTM D412 |
| 100% strain | 5.24 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 360 | % | ASTM D412 |
| tear strength | 45.5 | kN/m | ASTM D624 |
| Compression deformation | |||
| 23℃，22 hr | 28 | % | |
| 70℃，22 hr | 73 | % |
| Legal Statement | Nominal value | Unit | Test method |
|---|---|---|---|
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Squeeze description | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 160 to 182 | °C | |
| Barrel middle temperature | 166 to 188 | °C | |
| Barrel front temperature | 171 to 193 | °C | |
| Nozzle temperature | 177 to 199 | °C | |
| Processing (melt) temperature | 177 to 199 | °C | |
| Mold temperature | 35 to 49 | °C | |
| Injection pressure | 1.38 to 5.52 | MPa | |
| Injection speed | 快速 | ||
| Back pressure | 0.172 to 0.689 | MPa | |
| Screw speed | 50 to 100 | rpm | |
| Cushion | 3.81 to 25.4 | mm | |
| Barrel 1 zone temperature | 171 to 193 | °C | |
| Barrel 2 zone temperature | 177 to 196 | °C | |
| Barrel 3 zone temperature | 177 to 196 | °C | |
| Barrel 4 zone temperature | 182 to 199 | °C | |
| Barrel 5 zone temperature | 182 to 199 | °C | |
| Nozzle temperature | 188 to 202 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C, 20 in/min |
| 3. TBD |
| 4. Type 1 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |