Moplen 2000HEXP

About
Moplen 2000HEXP is a medium fluidity heterophasic copolymer development grade with an additivation suitable for injection moulding applications. It exhibits an outstanding impact performance, particularly at low temperature combined with a good processability. The resin is particularly designed for injection moulding applications where very high impact performance is critical. Moplen 2000HEXP can be used in luggage, closures and as an ideal base material for technical compounding. It is not intended for medical and pharmaceutical applications.&&

About

Moplen 2000HEXP is a medium fluidity heterophasic copolymer development grade with an additivation suitable for injection moulding applications. It exhibits an outstanding impact performance, particularly at low temperature combined with a good processability. The resin is particularly designed for injection moulding applications where very high impact performance is critical. Moplen 2000HEXP can be used in luggage, closures and as an ideal base material for technical compounding. It is not intended for medical and pharmaceutical applications.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Excellent Processability,High impact resistance,Moderate liquidity,Low temperature toughness,Impact copolymer
Availabilitys	Africa & Middle East ,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.890	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	16	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1000	MPa	ISO 527-2
tensile strength
yield	19.0	MPa	ISO 527-2/50
fracture	14.0	MPa	ISO 527-2
Tensile strain			ISO 527-2
yield	5.0	%	ISO 527-2
fracture	100	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-20℃	8.0	kJ/m²	ISO 179/1eA
0℃	10	kJ/m²	ISO 179/1eA
23℃	17	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	84.0	℃	ISO 75-2/B
Vicat Softening Temp
A50	140	℃	ISO 306/A50
Melting temperature	163	℃	DSC

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.