Moplen E120J - SOLIAO

About
Moplen E120J Moplen E120J is a Polypropylene Copolymer (PP Copolymer) material. It is available in Asia Pacific for compounding or injection molding. Important attributes of Moplen E120J are: Antistatic Copolymer Food Contact Acceptable Good Dimensional Stability Good Stiffness Typical applications include: Additive/Masterbatch Appliances Automotive Caps/Lids/Closures Consumer Goods&&Moplen E120J Devlopmental Grade Moplen E120J is a polypropylene impact copolymer manufactured using the Spheripol process. This grade is known for its optimized balance of stiffness and toughness with high melt flow. Typical applications include injection molding of thin wall containers, food containers, applicances. It can also be used as base resin for producing compounds.&&

About

Moplen E120J Moplen E120J is a Polypropylene Copolymer (PP Copolymer) material. It is available in Asia Pacific for compounding or injection molding. Important attributes of Moplen E120J are: Antistatic Copolymer Food Contact Acceptable Good Dimensional Stability Good Stiffness Typical applications include: Additive/Masterbatch Appliances Automotive Caps/Lids/Closures Consumer Goods&&Moplen E120J Devlopmental Grade Moplen E120J is a polypropylene impact copolymer manufactured using the Spheripol process. This grade is known for its optimized balance of stiffness and toughness with high melt flow. Typical applications include injection molding of thin wall containers, food containers, applicances. It can also be used as base resin for producing compounds.&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Good flexibility,High impact resistance,Good Dimensional Stability,High liquidity,Nucleation,Food contact compliance,Low odor,Block Copolymer,Antistatic property,Impact copolymer
Availabilitys	Africa & Middle East ,Latin America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.700	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	70	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, injection molding	24.0	MPa	ASTM D638
Tensile strain
Yield, injection molding	5.0	%	ASTM D638
Bending modulus
injection molding	1570	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20 ℃, injection molding	49	J/m	ASTM D256
23 ℃, injection molding	78	J/m	ASTM D256

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.