Moplen EP300H - SOLIAO

About
Moplen EP300H Moplen EP300H is a impact copolymer with good impact strength at low temperature. It can be processed by extrusion processes and injection moulding.&&Moplen EP300H Moplen EP300H is a heterophasic copolymer, suitable for injection moulding as well as for thermoforming applications. Moplen EP300H is a excellent low temperature impact behavior combined with a good processability. Moplen EP300H is suitable for food contact.&&Moplen EP300H Polypropylene Impact Copolymer Resin Features: Good cold impact resistance Good dimensional stability Applications: Corrugated board extrusion Stationary sheets Blow molding bottles Pail lids/ Crates injection&&

About

Moplen EP300H Moplen EP300H is a impact copolymer with good impact strength at low temperature. It can be processed by extrusion processes and injection moulding.&&Moplen EP300H Moplen EP300H is a heterophasic copolymer, suitable for injection moulding as well as for thermoforming applications. Moplen EP300H is a excellent low temperature impact behavior combined with a good processability. Moplen EP300H is suitable for food contact.&&Moplen EP300H Polypropylene Impact Copolymer Resin Features: Good cold impact resistance Good dimensional stability Applications: Corrugated board extrusion Stationary sheets Blow molding bottles Pail lids/ Crates injection&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Good flexibility,High impact resistance,Good Dimensional Stability,Good Hardness,low-temperature impact resistance,Impact copolymer
Availabilitys	Africa & Middle East ,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	1.8	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	25.0	MPa	ASTM D638
Tensile strain
yield	9.0	%	ASTM D638
Bending modulus	1150	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	无断裂		ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	88.0	℃	ASTM D648

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.