Moplen EP380S - SOLIAO

About
Moplen EP380S is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP380S is a block copolymer selected by customers for use in injection molding of DVD case, washing m/c tub, electrical appliances and housewares. Moplen EP380S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&

About

Moplen EP380S is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP380S is a block copolymer selected by customers for use in injection molding of DVD case, washing m/c tub, electrical appliances and housewares. Moplen EP380S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Dimensional Stability,Food contact compliance,Block Copolymer,Antistatic property,low-temperature impact resistance
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	30	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20 ℃, injection molding	49	J/m	ASTM D256
23 ℃, injection molding	98	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, injection molded	95.0	℃	ASTM D648
Vicat Softening Temp	152	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	90		ASTM D785
tensile strength
Yield, injection molding	22.6	MPa	ASTM D638
Tensile strain
Yield, injection molding	6.0	%	ASTM D638
Bending modulus
injection molding	1130	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.