Moplen EP5015 - SOLIAO

About
Moplen EP5015 Moplen EP5015 is a medium fluidity nucleated heterophasic copolymer suitable for injection molding applications. Moplen EP5015 exhibits an outstanding low temperature impact performance in combination with a good stiffness and an excellent processability. Moplen EP5015 is selected by customers for use in luggage, transport and cold storage crates, sports and leisure equipment, toys and typical consumer goods which require a high impact resistance at low temperatures. Moplen EP5015 resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Moplen EP5015 Moplen EP5015 is a medium fluidity nucleated heterophasic copolymer, with optimized balance of stiffness and toughness, high impact strength at low temperature, low warpage, good whitening resistance, and excellent processability. Typical customer applications are transport and cold storage crates, sports and leisure equipment, toys and typical consumer goods and luggages.&&

About

Moplen EP5015 Moplen EP5015 is a medium fluidity nucleated heterophasic copolymer suitable for injection molding applications. Moplen EP5015 exhibits an outstanding low temperature impact performance in combination with a good stiffness and an excellent processability. Moplen EP5015 is selected by customers for use in luggage, transport and cold storage crates, sports and leisure equipment, toys and typical consumer goods which require a high impact resistance at low temperatures. Moplen EP5015 resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Moplen EP5015 Moplen EP5015 is a medium fluidity nucleated heterophasic copolymer, with optimized balance of stiffness and toughness, high impact strength at low temperature, low warpage, good whitening resistance, and excellent processability. Typical customer applications are transport and cold storage crates, sports and leisure equipment, toys and typical consumer goods and luggages.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Excellent Processability,Good flexibility,High impact resistance,Nucleation,Food contact compliance,Moderate liquidity,low-temperature impact resistance
Availabilitys	Africa & Middle East ,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	15	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	88	J/m	ASTM D256
23℃	无断裂		ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ASTM D648
Vicat Softening Temp	125	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	40		ASTM D785
tensile strength
yield	21.1	MPa	ASTM D638
Tensile strain
yield	8.0	%	ASTM D638
Bending modulus	1080	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.