Moplen EP540N - SOLIAO

About
Moplen EP540N Moplen EP540N is a nucleated heterophasic copolymer with a medium flowability, suitable for injection moulding applications. Moplen EP540N is extensively applied in houseware, caps and in toys.&&Moplen EP540N High Crystalline Polypropylene Impact Copolymer Resin Features: High stiffness / high impact strength 20% higher rigidity than conventional copolymer Good impact resistance High dimensional stability Applications: Electrical appliances such as refrigerator and washing machine parts Automotives Containers Toys Housewares Closures&&

About

Moplen EP540N Moplen EP540N is a nucleated heterophasic copolymer with a medium flowability, suitable for injection moulding applications. Moplen EP540N is extensively applied in houseware, caps and in toys.&&Moplen EP540N High Crystalline Polypropylene Impact Copolymer Resin Features: High stiffness / high impact strength 20% higher rigidity than conventional copolymer Good impact resistance High dimensional stability Applications: Electrical appliances such as refrigerator and washing machine parts Automotives Containers Toys Housewares Closures&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,Crystal,Nucleation,Moderate liquidity,Impact copolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.890	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	12	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1500	MPa	ISO 527-2
tensile strength			ISO 527-2
yield	28.0	MPa	ISO 527-2
fracture	18.0	MPa	ISO 527-2
Tensile strain			ISO 527-2
yield	5.0	%	ISO 527-2
fracture	150	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179
-20℃	4.0	kJ/m²	ISO 179
0℃	4.5	kJ/m²	ISO 179
23℃	7.0	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	100	℃	ISO 75-2/B
Vicat Softening Temp
A50	151	℃	ISO 306/A50
Melting temperature	163	℃	DSC

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.