Moplen EP548R - SOLIAO

About
Moplen EP548R is a nucleated heterophasic copolymer with antistatic agent used for injection moulding applications. It exhibits an excellent stiffness / impact balance combined with a medium fluidity. Moplen EP548R is applied in toys, furniture and thin-walled injection moulding items. Moplen EP548R is suitable for food contact.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,Nucleation,Food contact compliance,Moderate liquidity,Antistatic property,Impact copolymer
Availabilitys	Africa & Middle East ,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	21	g/10min	ISO 1133
Melt Volume Rate
230℃，2.16 kg	28.0	cm³/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1550	MPa	ISO 527-2
tensile strength
yield	27.0	MPa	ISO 527-2
Tensile strain			ISO 527-2
yield	5.0	%	ISO 527-2
fracture	> 50	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-20℃	4.0	kJ/m²	ISO 179/1eA
0℃	4.5	kJ/m²	ISO 179/1eA
23℃	6.0	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength			ISO 179/1eU
-20℃	100	kJ/m²	ISO 179/1eU
0℃	130	kJ/m²	ISO 179/1eU
23℃	无断裂		ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Toughness/brittle transition temperature	-60.0	℃	ISO 6603-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.