Moplen EP548S - SOLIAO

About
Moplen EP548S Moplen EP548S is a nucleated heterophasic copolymer with antistatic agent used injection moulding applications. It combines a good impact/stiffness balance with a high fluidity. Moplen EP548S is typically used by customers in opaque containers, housewares, toys and in thin-walled containers for food packaging (e.g. margarine tubs, yoghurt pots, etc.).&&Moplen EP548S High Flow, High Crystalline Polypropylene Impact Copolymer Resin Features: Superior stiffness Good impact resistance Excellent antistatic property Short cycle time Applications: Thin wall food packaging High speed injection Electrical appliances Containers&&Moplen EP548S “Moplen” EP548S is a nucleated heterophasic copolymer, suitable for injection moulding applications, and contains an anti-static agent. It exhibits an outstanding balance of mechanical properties combined with a medium high fluidity. “Moplen” EP548S is extensively used in housewares and in thin-walled containers “Moplen” EP548S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&

About

Moplen EP548S Moplen EP548S is a nucleated heterophasic copolymer with antistatic agent used injection moulding applications. It combines a good impact/stiffness balance with a high fluidity. Moplen EP548S is typically used by customers in opaque containers, housewares, toys and in thin-walled containers for food packaging (e.g. margarine tubs, yoghurt pots, etc.).&&Moplen EP548S High Flow, High Crystalline Polypropylene Impact Copolymer Resin Features: Superior stiffness Good impact resistance Excellent antistatic property Short cycle time Applications: Thin wall food packaging High speed injection Electrical appliances Containers&&Moplen EP548S “Moplen” EP548S is a nucleated heterophasic copolymer, suitable for injection moulding applications, and contains an anti-static agent. It exhibits an outstanding balance of mechanical properties combined with a medium high fluidity. “Moplen” EP548S is extensively used in housewares and in thin-walled containers “Moplen” EP548S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,High liquidity,Crystal,Nucleation,Quick molding cycle,Food contact compliance,Antistatic property,Impact copolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	44	g/10min	ISO 1133
Melt Volume Rate
230℃，2.16 kg	59.0	cm³/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-20℃	3.0	kJ/m²	ISO 179/1eA
0℃	3.5	kJ/m²	ISO 179/1eA
23℃	5.0	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength			ISO 179/1eU
-20℃	85	kJ/m²	ISO 179/1eU
0℃	100	kJ/m²	ISO 179/1eU
23℃	110	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	95.0	℃	ISO 75-2/B
Toughness/brittle transition temperature	-53.0	℃	ISO 6603-2
Vicat Softening Temp
A50	151	℃	ISO 306/A50
B50	80.0	℃	ISO 306

MECHANICAL	Nominal value	Unit	Test method
Ball hardness
H358/30	68.0	MPa	ISO 2039-1
Tensile modulus	1550	MPa	ISO 527-2
tensile strength
yield	28.0	MPa	ISO 527-2
Tensile strain			ISO 527-2
yield	5.0	%	ISO 527-2
fracture	30	%	ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.