Moplen EP640S - SOLIAO

About
Moplen EP640S is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP640S is a block copolymer suitable for thin-walled packaging, parts of electrical appliances, housewares, etc. Moplen EP640S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,High impact resistance,Food contact compliance,Block Copolymer,Ultra high toughness,low-temperature impact resistance
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	40	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20 ℃, injection molding	39	J/m	ASTM D256
23 ℃, injection molding	78	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	98		ASTM D785
tensile strength
Yield, injection molding	27.5	MPa	ASTM D638
Tensile strain
Yield, injection molding	4.0	%	ASTM D638
Bending modulus
injection molding	1570	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.