Moplen EP649N - SOLIAO

About
Moplen EP649N Moplen EP649N is a polypropylene impact copolymer manufactured with high gloss, good stiffness and impact balance, and excellent antistatic properties. Typical customer applications are injection molding of electrical appliance parts, toys and housewares.&&Moplen EP649N Moplen EP649N is a medium flow heterophasic copolymer development grade with outstanding mechanical properties and antistatics. The product features an easy processability and an excellent stiffness combined with good impact properties and high gloss. This grade is suitable for a wide range of appliances parts, Toys and consumer goods industries. Moplen EP649N resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&

About

Moplen EP649N Moplen EP649N is a polypropylene impact copolymer manufactured with high gloss, good stiffness and impact balance, and excellent antistatic properties. Typical customer applications are injection molding of electrical appliance parts, toys and housewares.&&Moplen EP649N Moplen EP649N is a medium flow heterophasic copolymer development grade with outstanding mechanical properties and antistatics. The product features an easy processability and an excellent stiffness combined with good impact properties and high gloss. This grade is suitable for a wide range of appliances parts, Toys and consumer goods industries. Moplen EP649N resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Good surface appearance,High impact resistance,Food contact compliance,Antistatic property,Impact copolymer
Availabilitys	Africa & Middle East ,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	10	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	39	J/m	ASTM D256
23℃	98	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	130	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	105		ASTM D785
tensile strength
yield	31.4	MPa	ASTM D638
Tensile strain
yield	7.0	%	ASTM D638
Bending modulus	1810	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.