Moplen HP500D - SOLIAO

About
Moplen HP500D Moplen HP500D is a high molecular weight polypropylene homopolymer resin, with good stiffness, good heat resistance, low sagging, low yellowness, low odor, and excellent chemical resistance. Typical customer applications are extrusion of sheets, profiles and non-pressure pipes, as well as for trays and containers, for food or electronic components.&&Moplen HP500D High Molecular Weight Polypropylene Homopolymer Resin Features: Specifically designed for melt phase thermoforming Low sagging Low yellowness Good stiffness Low taste and odor transfer Good heat resistance Excellent chemical resistance Applications: Food trays Food containers Electronic trays Sheets Non-pressure pipes Profiles&&

About

Moplen HP500D Moplen HP500D is a high molecular weight polypropylene homopolymer resin, with good stiffness, good heat resistance, low sagging, low yellowness, low odor, and excellent chemical resistance. Typical customer applications are extrusion of sheets, profiles and non-pressure pipes, as well as for trays and containers, for food or electronic components.&&Moplen HP500D High Molecular Weight Polypropylene Homopolymer Resin Features: Specifically designed for melt phase thermoforming Low sagging Low yellowness Good stiffness Low taste and odor transfer Good heat resistance Excellent chemical resistance Applications: Food trays Food containers Electronic trays Sheets Non-pressure pipes Profiles&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Low odor,High molecular weight,Heat Resistance, Good,Solvent resistance,Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	0.50	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	35.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	1560	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	100	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	103	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.