Moplen HP602N - SOLIAO

About
Moplen HP602N Moplen HP602N is a homopolymer selected by customers for use in injection molding of housewares articles, toys, packaging, and closures. Moplen HP602N resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Moplen HP602N Moplen HP602N is a polypropylene homopolymer manufactured using the Spheripol process. It is known for its optimized balance of stiffness and toughness, and is particularly suitable for injection molding. Potential end use applications include housewares, toys, closures and other packaging items.&&

About

Moplen HP602N Moplen HP602N is a homopolymer selected by customers for use in injection molding of housewares articles, toys, packaging, and closures. Moplen HP602N resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Moplen HP602N Moplen HP602N is a polypropylene homopolymer manufactured using the Spheripol process. It is known for its optimized balance of stiffness and toughness, and is particularly suitable for injection molding. Potential end use applications include housewares, toys, closures and other packaging items.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	High impact resistance,Good Rigidity,Excellent Processability,Low warping,Good flexibility,Homopolymer,Good surface appearance,Food contact compliance,Good color stability
Availabilitys	Africa & Middle East ,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	12	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Izod Notched Impact strength
23 ℃, injection molding	29.4	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature HDT
0.45 MPa, unannealed, injection molding	107	℃	ASTM D648
	152	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	104		ASTM D785
Tensile Strength
Injection Molding	34.3	MPa	ASTM D638
Tensile Strain
Injection Molding	12	%	ASTM D638

	1568	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.