Moplen HP740T - SOLIAO

About
Moplen HP740T Moplen HP740T is a nucleated polypropylene HOMO polymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP740T is a homopolymer selected by customers for use in wall injection molding for packaging, food tray. Moplen HP740T meets the FDA requirement in the code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Moplen HP740T Moplen HP740T is a polypropylene homopolymer with outstanding flowability, excellent transparency, high gloss, and high stiffness. Typical customer applications are rigid packaging, thin wall injection molding (TWIM) of food trays, drinking cups, plastic files, DVD casing.&&

About

Moplen HP740T Moplen HP740T is a nucleated polypropylene HOMO polymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP740T is a homopolymer selected by customers for use in wall injection molding for packaging, food tray. Moplen HP740T meets the FDA requirement in the code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Moplen HP740T Moplen HP740T is a polypropylene homopolymer with outstanding flowability, excellent transparency, high gloss, and high stiffness. Typical customer applications are rigid packaging, thin wall injection molding (TWIM) of food trays, drinking cups, plastic files, DVD casing.&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Quick molding cycle,Good Clarity,Food contact compliance,Random copolymer,High liquidity,Homopolymer,Good surface appearance,Good Rigidity,Antistatic property,Nucleation
Availabilitys	Asia Pacific,Africa & Middle East
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	60	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Izod Notched Impact strength
23 ℃, injection molding	19.6	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature HDT
0.45 MPa, unannealed, injection molding	125	℃	ASTM D648
	151	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	105		ASTM D785
Tensile Strength
Injection Molding	36.2	MPa	ASTM D638
Tensile Strain
Injection Molding	10	%	ASTM D638

	1764	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.