Moplen RP5005 - SOLIAO

About
Moplen RP5005 is a natural, nucleated polypropylene random copolymer with high melt viscosity for extrusion. The product has a high heat and extraction stability. It is not intended for medical and pharmaceutical applications. Moplen RP5005 resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. This is a developmental grade, changes in formulation and specification are possible. The information is valid at the time of writing. We suggest customers to check and confirm with us the most updated statements from time to time.&&

About

Moplen RP5005 is a natural, nucleated polypropylene random copolymer with high melt viscosity for extrusion. The product has a high heat and extraction stability. It is not intended for medical and pharmaceutical applications. Moplen RP5005 resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. This is a developmental grade, changes in formulation and specification are possible. The information is valid at the time of writing. We suggest customers to check and confirm with us the most updated statements from time to time.&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,High Viscosity,Nucleation,Food contact compliance,High Heat Resistance,Solvent resistance
Availabilitys	Asia Pacific
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183 , ASTM D1505
Melt Flow Rate			ASTM D1238 , ISO 1133
230℃，2.16kg	0.30	g/10min	ASTM D1238，ISO 1133
230℃，5.0kg	1.3	g/10min	ASTM D1238，ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
injection molding	800	MPa	ISO 527-2
tensile strength
Yield, injection molding	26.5	MPa	ASTM D638
Yield, injection molding	24.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	10	%	ASTM D638 , ISO 527-2
Bending modulus
injection molding	834	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength			ISO 179/1eU
-20 ℃, injection molding	45	kJ/m²	ISO 179/1eU
0 ℃, injection molding	无断裂		ISO 179/1eU
23 ℃, injection molding	无断裂		ISO 179/1eU
Impact strength of cantilever beam notch
23 ℃, injection molding	230	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	83.0	℃	ASTM D648
0.45 MPa, unannealed	65.0	℃	ISO 75-2/B
Vicat Softening Temp
—	123	℃	ASTM D1525
—	125	℃	ISO 306

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.