Moplen RP5007K

About
Moplen RP5007K Moplen RP5007K is a nucleated and very high fluidity polypropylene random copolymer manufactured by PolyMirae using Spheripol process technology licensed from LyondellBasell. Moplen RP5007K is specially designed for good processability and excellent clarity in low processing temperature with balanced mechanical properties. Moplen RP5007K is a random copolymer particularly suitable for injection molding of DVD case, houseware, thin walled articles (TWIM) for food and non food applications, transparency containers and boxes of big size. Moplen RP5007K meets the FDA requirement in the code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Moplen RP5007K Moplen RP5007K is a nucleated and very high fluidity polypropylene random copolymer with very high fluidity, excellent clarity in low processing temperature for high productivity, less voids formation in injection molding, and good mechanical property balance. Typical customer applications are DVS casing, houseware, thin wall injection molding (TWIM) articles, transparent containers and boxes for food and non food.&&

About

Moplen RP5007K Moplen RP5007K is a nucleated and very high fluidity polypropylene random copolymer manufactured by PolyMirae using Spheripol process technology licensed from LyondellBasell. Moplen RP5007K is specially designed for good processability and excellent clarity in low processing temperature with balanced mechanical properties. Moplen RP5007K is a random copolymer particularly suitable for injection molding of DVD case, houseware, thin walled articles (TWIM) for food and non food applications, transparency containers and boxes of big size. Moplen RP5007K meets the FDA requirement in the code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Moplen RP5007K Moplen RP5007K is a nucleated and very high fluidity polypropylene random copolymer with very high fluidity, excellent clarity in low processing temperature for high productivity, less voids formation in injection molding, and good mechanical property balance. Typical customer applications are DVS casing, houseware, thin wall injection molding (TWIM) articles, transparent containers and boxes for food and non food.&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Good surface appearance,High liquidity,Nucleation,Food contact compliance,Random copolymer
Availabilitys	Africa & Middle East ,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	75	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	44	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, injection molded	91.0	℃	ASTM D648

optical performance	Nominal value	Unit	Test method
Haze	18	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	93		ASTM D785
tensile strength
yield	29.4	MPa	ASTM D638
Tensile strain
yield	11	%	ASTM D638
Bending modulus	1180	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.