Moplen S30SW - SOLIAO

About
Moplen S30SW is a polypropylene homo-polymer particularly suitable for the production of sheet for thermoforming, film yarn and monofilament. Moplen S30SW combines excellent process ability with high stiffness and low water carry-over. Moplen S30SW is designed for the production of quality thermoforming such as drinking beakers, packaging for dairy products, nursery flower pots& trays for fruits, biscuits & chocolates. Moplen S30SW is also particularly suitable to produce film yarn, both with cast and tubular processes. Textile film yarns have a denier count of not more than 1000 to 1200 and care used for the production of the bags, industrial fabrics & mats. Film yarn with a denier count ranging 3000 to 28000 is used for baler twins, packaging twins, ropes and chenille. Moplen S30SW is also well suited for the production of monofilament used for instance for brush & broom filling & technical applications. Strapping, extruded nets, blow moulded small containers & technical components are other typical applications. * Moplen S30SW is suitable for food contact.&&

About

Moplen S30SW is a polypropylene homo-polymer particularly suitable for the production of sheet for thermoforming, film yarn and monofilament. Moplen S30SW combines excellent process ability with high stiffness and low water carry-over. Moplen S30SW is designed for the production of quality thermoforming such as drinking beakers, packaging for dairy products, nursery flower pots& trays for fruits, biscuits & chocolates. Moplen S30SW is also particularly suitable to produce film yarn, both with cast and tubular processes. Textile film yarns have a denier count of not more than 1000 to 1200 and care used for the production of the bags, industrial fabrics & mats. Film yarn with a denier count ranging 3000 to 28000 is used for baler twins, packaging twins, ropes and chenille. Moplen S30SW is also well suited for the production of monofilament used for instance for brush & broom filling & technical applications. Strapping, extruded nets, blow moulded small containers & technical components are other typical applications. * Moplen S30SW is suitable for food contact.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Food contact compliance,Low water portability,Homopolymer
Availabilitys	Africa & Middle East

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	1.8	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	36.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	1450	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	60	J/m	ASTM D256

Aging performance	Nominal value	Unit	Test method
Oven Aging
150℃	15.0	day	ASTM D3012

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	94.0	℃	ASTM D648
Vicat Softening Temp	152	℃	ASTM D1525 2

Notes
1. Typical properties: these are not to be construed as specifications.
2. Loading 1 (10 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.