Moplen S38F - SOLIAO

About
Moplen S38F is a homo-polymer designed for the production of biaxial oriented polypropylene films. Moplen S38F has been designed to provide a very stable extrusion on stenter and double bubble lines and to give excellent thickness control, increased draw ability and readiness to a two way orientation. BOPP films produced by Moplen S38F feature good mechanical properties, high impact strength and puncture resistance, even at low temperatures. The films form an excellent barrier against moisture, odours oils, fats and oxidation and feature high transparency, high gloss and good printability after corona treatment. Monolayer films made of Moplen S38F with a thickness ranging from 20 to 50 micron are used for food packaging, textiles packaging and flower wrappings. Monolayer films with a thickness of 25 to 45 micron find their major use in adhesive tapes. BOPP film made with Moplen S38F is also suitable for lamination to other flexible films. * Moplen S38F is suitable for food contact.&&

About

Moplen S38F is a homo-polymer designed for the production of biaxial oriented polypropylene films. Moplen S38F has been designed to provide a very stable extrusion on stenter and double bubble lines and to give excellent thickness control, increased draw ability and readiness to a two way orientation. BOPP films produced by Moplen S38F feature good mechanical properties, high impact strength and puncture resistance, even at low temperatures. The films form an excellent barrier against moisture, odours oils, fats and oxidation and feature high transparency, high gloss and good printability after corona treatment. Monolayer films made of Moplen S38F with a thickness ranging from 20 to 50 micron are used for food packaging, textiles packaging and flower wrappings. Monolayer films with a thickness of 25 to 45 micron find their major use in adhesive tapes. BOPP film made with Moplen S38F is also suitable for lamination to other flexible films. * Moplen S38F is suitable for food contact.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Clarity,Good surface appearance,High impact resistance,Good dissection,Good Printability,Retention of aroma ,Food contact compliance,Moisture resistance,Inoxidizability,Grease resistance,Block resin,Puncture Resistant,Homopolymer
Availabilitys	Africa & Middle East
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	1.8	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	36.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	1450	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	60	J/m	ASTM D256

Aging performance	Nominal value	Unit	Test method
Oven Aging
150℃	15.0	day	ASTM D3012

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	94.0	℃	ASTM D648
Vicat Softening Temp	152	℃	ASTM D1525 2

Notes
1. Typical properties: these are not to be construed as specifications.
2. Loading 1 (10 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.