| About |
|---|
| MORETEC™ 0138N是一种线性低密度聚乙烯产品,。 它可以通过吹塑薄膜进行加工,在北美洲、欧洲或亚太地区有供货。 MORETEC™ 0138N的应用领域包括包装、电影 和 涂覆应用。 特性包括: 高强度 加工性能良好&& |
| Product Description | |
|---|---|
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.917 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.3 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | < 1000 | hr | ASTM D1693 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | 无断裂 | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 103 | ℃ | ISO 306 |
| Melting temperature | 119 | ℃ | ISO 11357-3 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, injection molding | 54 | ISO 868 | |
| Tensile modulus | |||
| injection molding | 190 | MPa | ISO 527-2 |
| tensile strength | |||
| Yield, injection molding | 9.80 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, injection molding | < 300 | % | ISO 527-2 |
| Bending modulus | |||
| injection molding | 190 | MPa | ISO 178 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |