MTEGRITY™ PS General Purpose GS520

About
MTEGRITY™ PS General Purpose GS520 is a General Purpose Polystyrene product. It is available in North America. Typical application: Kitchenware. Primary characteristic: high flow.&&

Product Description
Generic	PS (GPPS)
Material Status	Commercial: Active
Features	High liquidity
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
200℃，5.0kg	20	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	37.9	MPa	ASTM D638
Bending modulus	2960	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	16	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	71.1	℃	ASTM D648
Vicat Softening Temp	82.2	℃	ASTM D1525

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.