| About |
|---|
| MTM70 is a toughened, variable cure temperature prepreg matrix formulated for the manufacture of structural components operating at elevated service temperatures. After a 135°C (275°F) standard cure cycle, MTM70 provides excellent mechanical performance for components operating at up to 140°C (284°F). After post—cure to 180°C (356°F), MTM70 will operate at higher temperatures without significant loss of toughness.&& |
| Product Description | |
|---|---|
| Supplier | Cytec Industries |
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | Good flexibility,High Heat Resistance,Baking |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.27 | g/cm³ | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | |||
| — | 145 | ℃ | |
| — | 190 | ℃ |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |