| About |
|---|
| Product Description | |
|---|---|
| Supplier | TEIJIN |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Antistatic property,Prevent continuous charge,HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.13 | g/cm³ | ISO 1183 |
| Shrinkage rate | Internal Method | ||
| TD：4.0 mm | 0.50 to 0.70 | % | |
| MD：4.0 mm | 0.50 to 0.70 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Modulus | 1760 | MPa | ISO 527-1-2 |
| Tensile Strength | ISO 527-2/50 | ||
| Yield yld | 45.0 | MPa | |
| Broken BRK | 50.0 | MPa | |
| Tensile Strain | ISO 527-2/50 | ||
| Yield yld | 3.0 | % | |
| Broken BRK | 120 | % | |
| Flexural Modulus | 1800 | MPa | ISO 178 |
| Flexural Strength | 70.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 80 | kJ/m² | ISO 179 |
| Charpy Unnotch Impact strength | 无断裂 | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 0.45 MPa, unannealed | 107 | ℃ | ISO 75-2/B |
| 1.8 MPa, unannealed | 93.0 | ℃ | ISO 75-2/A |
| Vicat Softening Temperature | |||
| B50 | 109 | ℃ | ISO 306 |
| Coeff. of linear thermal expansion | ISO 11359-2 | ||
| MD | 8.0E-5 | 1/℃ | |
| TD | 8.0E-5 | 1/℃ |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface Resistivity | 1.0E+10 to 1.0E+11 | ohms | IEC 60093 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | |||
| 1.50 mm | HB | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |