| About |
|---|
| Product Description | |
|---|---|
| Supplier | TEIJIN |
| Generic | PC+ABS |
| Material Status | Commercial: Negative |
| Features | Flame Characteristics,V-2,5VB,Halogen free,V-1,V-0 |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ISO 1183 |
| Molding shrinkage | Internal Method | ||
| TD：4.0 mm | 0.50 to 0.70 | % | Internal Method |
| MD：4.0 mm | 0.50 to 0.70 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Broken BRK | 53.0 | MPa | ISO 527-2/50 |
| Yield yld | 65.0 | MPa | ISO 527-2/50 |
| Tensile Strain | |||
| Broken BRK | 120 | % | ISO 527-2/50 |
| Flexural Modulus | 2600 | MPa | ISO 178 |
| Flexural Strength | 95.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 35 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.8 MPa, unannealed | 84.0 | ℃ | ISO 75-2/A |
| 0.45 MPa, unannealed | 94.0 | ℃ | ISO 75-2/B |
| Vicat Softening Temperature | |||
| B50 | 97.0 | ℃ | ISO 306 |
| Coeff. of linear thermal expansion | |||
| TD | 8.0E-5 | 1/℃ | ISO 11359-2 |
| MD | 8.0E-5 | 1/℃ | ISO 11359-2 |
| Relative Temperature Index (RTI) | |||
| Electrical Elec | 85 | ℃ | UL-746B |
| Impact | 85 | ℃ | UL-746B |
| Strength Str | 85 | ℃ | UL-746B |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | IEC 60093 |
| Compared Tracking Index | 2 | PLC Code | UL 746 |
| High Arc Burning Index (HAI) | |||
| 1.2 mm | 3 | PLC Code | UL 746A |
| 1.5 mm | 3 | PLC Code | UL 746A |
| 2.0 mm | 2 | PLC Code | UL 746A |
| 3.0 mm | 2 | PLC Code | UL 746A |
| Hot wire ignition | |||
| 1.2 mm | 3 | PLC Code | UL 746A |
| 1.5 mm | 3 | PLC Code | UL 746A |
| 2.0 mm | 2 | PLC Code | UL 746A |
| 3.0 mm | 2 | PLC Code | UL 746A |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | UL 94 | ||
| 0.70 mm | V-2 | UL 94 | |
| 1.20 mm | V-1 | UL 94 | |
| 1.50 mm | V-0 | UL 94 | |
| 2.00 mm | 5VB | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Drying Temperature | 80 | ℃ | |
| Drying Time | 5-8 | hr | |
| Melt Temperature | 230 | ℃ | |
| Mold Temperature | 270 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |