| About |
|---|
| Product Description | |
|---|---|
| Supplier | TEIJIN |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Halogen free,Good Rigidity,Biocompatible,Flame Characteristics |
| Availabilitys | Latin America,North America,Europe,Asia Pacific,Africa & Middle East |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| 1.17 | g/cm³ | ISO 1183 | |
| Mold Shrinkage | |||
| flow | 0.5-0.7 | % | |
| vertical | 0.5-0.7 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Stress | |||
| Break, 50 mm/min | 50 | MPa | ISO 527-1-2 |
| Yield yld, 50 mm/min | 60 | MPa | ISO 527-1-2 |
| Tensile Elongation | |||
| Yield yld | 100 | % | ISO 527-1 |
| 2600 | MPa | ISO 178 | |
| Flexural Strength | 90 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy notch impact strength | 30 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.8 MPa | 80 | ℃ | ISO 75-1/2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 0.45 mm | HB | UL 94 | |
| 0.80 mm | V-2 | UL 94 | |
| 1.20 mm | V-1 | UL 94 | |
| 1.50 mm | V-0 | UL 94 | |
| 1.80 mm | 5VB | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Drying conditions | Nominal value | Unit | Test method |
| Molding temperature | 230~270 | ℃ | |
| Mold Temperature | 50~70 | ℃ | |
| Injection Pressure | 59~147 | MPa | |
| Drying Temperature | 80 | ℃ | |
| Drying Time | 5~8 | hrs | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |