| About |
|---|
| AS319LW-01US is a compounded thermoplastic polyolefin (TPO) designed for exterior automotive applications requiring cold temperature impact, processability and paintability. This product is available in natural, generic black or pre-colored for partial paint applications. Key Applications: Exterior parts bumper fascia cladding&& |
| Product Description | |
|---|---|
| Generic | Polyolefin Elastomer |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Sprayable,low-temperature impact resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.03 | g/cm³ | ISO 1183/A |
| Melt Flow Rate | |||
| 230℃，2.16kg | 24 | g/10min | ISO 1133 |
| Shrinkage rate | ISO 294-4 | ||
| — | 5.0E-3 to 7.0E-3 | % | ISO 294-4 |
| 80℃，1 hrs | 6.0E-3 to 8.0E-3 | % | ISO 294-4 |
| 121℃，1 hrs | 7.0E-3 to 9.0E-3 | % | ISO 294-4 |
| Ash Content | |||
| 600℃ | 19.0 | % | ISO 3451-1A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 17.0 | MPa | ISO 527-2/1A/50 |
| Bending modulus | |||
| string | 1700 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 46 | kJ/m² | ISO 180-1A |
| Dart impact equipped with measuring instruments | |||
| 23℃，Max Load | 16.0 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 102 | ℃ | ISO 75-2/Bf |
| 1.8 MPa, unannealed | 55.0 | ℃ | ISO 75-2/Af |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |