| About |
|---|
| PA6加纤30% |
| Product Description | |
|---|---|
| Supplier | DOSN |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good wear resistance |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.38 | g/cm³ | ASTM D792 |
| Shrinkage rate | 0.3-0.7 | % | ASTM D955 |
| Water absorption rate | 0.8 | % 23℃ | undefined |
| Fiberglass content | 30 | % | – |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strain | 7 | % | ASTM D638 |
| tensile strength | 175 | MPa | D638 |
| bending strength | 260 | MPa | ASTM D790 |
| Bending modulus | 8500 | MPa | ASTM D792 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | |||
| 23℃ | 180 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa | 245 | ℃ | ASTM D648 |
| Flame retardant level | HB | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |