| About |
|---|
| PLA polymers (or Polylactic acid) are thermoplastic resins made from renewable vegetal resources and are certified as compostable in agreement with standards in use. Some of our PLA grades are certified as GMO free. PLA can be processed on standard equipments. Markets : food packaging, cosmetics, horticulture, medical, technical parts… Properties Transparent, the most economical… Thermal resistance, flexibility and barrier properties to improve… Standard&& |
| Product Description | |
|---|---|
| Generic | PLA |
| Material Status | Commercial: Active |
| Features | Good flexibility,Renewable resources,Compostable,Block resin |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.24 | g/cm³ | ISO 1183 |
| Melt Flow Rate | 2.0 to 10 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3300 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 160 | % | ISO 527-2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |