NAXALOY® 770 - SOLIAO

About
NAXALOY 770 is a high impact Polycarbonate/ABS blend. This material is available in black, natural, and custom colors. It is typically used for automotive interior/exterior covered & painted applications. Please contact us for additional information.&&

Product Description
Generic	PC+ABS
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.13	g/cm³	ASTM D792
Melt Flow Rate
230℃，3.80kg	3.0	g/10min	ASTM D1238
Shrinkage rate
MD：3.2 mm	0.50 to 0.70	%	ASTM D955
Water absorption rate
24hr	0.15	%	ASTM D570

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	110	℃	ASTM D648

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-30℃	430	J/m	ASTM D256
23℃	640	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	52.0	MPa	ASTM D638
Bending modulus	2070	MPa	ASTM D790
bending strength	83.0	MPa	ASTM D790
Dart impact equipped with measuring instruments
-29℃，Ductile Failure	52.0	J	ASTM D3763
Rockwell hardness
R-level	115		ASTM D785

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.