NEFTEKHIM PS 585

About
Low flowable PS with high molecular weight. Application: to extrude expanded articles, such like eggs containers, meat and meal trays, to manufacture aligned structure sheet PS.&&

Product Description
Generic	PS (GPPS)
Material Status	Commercial: Active
Features	Low liquidity,Foaming performance,High molecular weight
Availabilitys	Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
200℃，5.0kg	1.5 to 3.5	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength	38.0	MPa	ASTM D638
bending strength	95.0	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	98.0	℃	ASTM D1525

Supplementary information	Nominal value	Unit	Test method
Residual Styrene	< 0.050	%

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.