| About |
|---|
| NEO-ZEX™ 2024G is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Consumer Goods.&& |
| Product Description | |
|---|---|
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Good liquidity |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.915 | g/cm³ | ISO 1183 |
| Resistance to environmental stress cracking | 2.00 | hr | ASTM D-1693 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 25 | g/10min | ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 115 | ℃ | ISO 11357-3 |
| Vicat Softening Temp | |||
| Vicat Softening Temp | 93 | ℃ | ISO 306 |
| Linear coefficient of thermal expansion |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | NB | kJ/m² | ISO 179/1eU |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 50 | ISO 868 | |
| tensile strength | |||
| 23℃ | 7.20 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | <300 | % | ISO 527-2 |
| Bending modulus | |||
| 23℃ | 150 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |