| About |
|---|
| Neoflon® PFA AP-201SH is a high purity grade resin especially designed for the usage in the semiconductor industry. It is superior in melt flowability and is suitable for complex and small shape articles. Typical Applications: Complex injection molded parts.&& |
| Product Description | |
|---|---|
| Supplier | Daikin Fluorochemicals |
| Generic | PFA |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,Excellent Processability,Good Clarity,High purity,Good Electrical Properties,Good liquidity,Low coefficient of friction,Corrosion Resistant,Flame Characteristics,Copolymer,V-0 |
| Availabilitys | North America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Melting temperature | 300 to 310 | ℃ | ASTM D4591 |
| Linear coefficient of thermal expansion | |||
| MD：20~100℃ | 1.2E-4 | 1/℃ | ASTM D696 |
| specific heat | 1050 | J/kg/℃ | |
| Thermal conductivity coefficient | 0.26 | W/m/K | ASTM C177 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 1.60 mm | V-0 | UL 94 | |
| Extreme oxygen index | |||
| 1.57 mm | > 95 | % | ASTM D2863 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 2.14 to 2.16 | g/cm³ | ASTM D792 |
| Apparent density | 1.00 to 1.40 | g/cm³ | JIS K6891 |
| Melt Flow Rate | |||
| 372℃，5.0kg | 20 to 30 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| saturated | < 0.010 | % | ASTM D570 |
| Apparent viscosity of melt | |||
| 380℃ | 2.00E+6 to 2.50E+7 | mPa·s |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. DSC |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |