| About |
|---|
| Neoflon® ETFE EP-521 was developed for extrusion of thin coatings of small wire sizes such as aerospace wire, automotive wire, appliance wire, thin film and tubing, etc. It may also be used for injection molding of thin wall parts.&& |
| Product Description | |
|---|---|
| Supplier | Daikin Fluorochemicals |
| Generic | ETFE |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good Electrical Properties,Good liquidity,Copolymer,Solvent resistance |
| Availabilitys | North America,Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.72 to 1.76 | g/cm³ | ASTM D3159 |
| Melt Flow Rate | |||
| 297℃，5.0kg | 8.0 to 16 | g/10min | ASTM D3159 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 42.0 to 47.0 | MPa | ASTM D3159 |
| Tensile strain | |||
| fracture | 420 to 450 | % | ASTM D3159 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 260 to 270 | ℃ | ASTM D3159 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. DSC |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |