| About |
|---|
| NEOFLON ETFE is a copolymer of tetrafluoroethylene and ethylene, and has the lowest specific gravity among all fluoropolymers. It has superior characteristics in melt processability and mechanical properties compared with PTFE and FEP, and has good electrical and chemical properties. It is suitable for applications requiring its mechanical toughness, chemical resistance, heat resistance and electrical properties. Features Good balance of melt flowability and mechanical properties. Best-suited for extrusion molding and injection molding for wire coating, films and tubes.&& |
| Product Description | |
|---|---|
| Supplier | Daikin Fluorochemicals |
| Generic | ETFE |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good Electrical Properties,Copolymer,Solvent resistance |
| Availabilitys | Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.77 | g/cm³ | |
| Melt Flow Rate | 9.0 to 15 | g/10min | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 25°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |