| About |
|---|
| Neoflon® ETFE EP-620AS, conductive ETFE, was developed for extrusion and injection molding of parts with improved crack resistance.&& |
| Product Description | |
|---|---|
| Supplier | Daikin Fluorochemicals |
| Generic | ETFE |
| Material Status | Commercial: Active |
| Features | Conductive,Copolymer |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.82 to 1.88 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 297℃，5.0kg | 1.8 to 4.0 | g/10min | ASTM D3159 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 25.0 to 35.0 | MPa | ASTM D3159 |
| Tensile strain | |||
| fracture | 200 to 400 | % | ASTM D3159 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 218 to 222 | ℃ | ASTM D3159 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. DSC |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |