| About |
|---|
| Neoflon® FEP NP-112 was developed with improved stress crack resistance and improved extrusion speed for extrusion of wire insulation for appliance wire, plenum cable insulation, tubing, and film, etc. It may also be used for injection molding of thin wall parts.&& |
| Product Description | |
|---|---|
| Supplier | Daikin Fluorochemicals |
| Generic | FEP |
| Material Status | Commercial: Active |
| Features | High ESCR |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 372℃，2.16kg | 9.0 to 14 | g/10min | ASTM D2116 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | > 20.0 | MPa | ASTM D2116 |
| Tensile strain | |||
| fracture | > 300 | % | ASTM D2116 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 250 to 265 | ℃ | ASTM D2116 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| MIT flexural strength (cycle) | 15000 | ASTM D2176 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. DSC |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |