| About |
|---|
| Neoflon® FEP NP-40 was developed for extrusion and compression molding applications where superior stress crack resistance is desired.&& |
| Product Description | |
|---|---|
| Supplier | Daikin Fluorochemicals |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | 1 | g/10min | ASTM D2116 |
| Density | 2.15 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 30 | MPa | ASTM D638 |
| elongation | 300 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 270 | ℃ | ASTM D2116 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. DSC |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |