| About |
|---|
| Network Polymers LDPE 10 0218是一种乙烯醋酸乙烯共聚物 (EVA)产品,。 它,在北美洲有供货。 典型应用领域为:食品接触应用。&& |
| Product Description | |
|---|---|
| Generic | EVA |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.941 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.5 | g/10min | ASTM D1238 |
| Vinyl acetate content | 18.0 | wt% | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 90 | ASTM D2240 | |
| Shaw’s D | 40 | ASTM D2240 | |
| tensile strength | |||
| yield | 17.9 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 750 | % | ASTM D638 |
| Bending modulus | |||
| injection molding | 44.1 | MPa | ASTM D790-A |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile impact strength | ASTM D1822 | ||
| -20℃ | 483 | kJ/m² | ASTM D1822 |
| 23℃ | 557 | kJ/m² | ASTM D1822 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -98.3 | ℃ | ASTM D746 |
| Vicat Softening Temp | 63.9 | ℃ | ASTM D1525 4 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |