| About |
|---|
| Description PA66 Glass Fiber Reinforced Heat stabilized Hydrolysis resistant Black compound Product Applications This grade is recommended for molded parts exposed to high temperatures and in contact with oils and greases, under the hood application such as radiator end tanks, Engine supports brake, clutch and gas pedals. Benefits Fatigue resistant, Fuel/oil/greases resistant, Anti freeze resistant & creep resistant with a good balance of strees- strain behavior.&& |
| Product Description | |
|---|---|
| Generic | PA66 |
| Material Status | Commercial: Negative |
| Features | Good flexibility,Hydrolysis stability,Fatigue resistance,Grease resistance,Heat Stabilized,Fuel resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data |
|---|
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature – vacuum dryer | 80 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Recommended maximum moisture content | 0.20 | % | |
| Barrel rear temperature | 260 to 270 | °C | |
| Barrel middle temperature | 270 to 280 | °C | |
| Barrel front temperature | 280 to 290 | °C | |
| Mold temperature | 70 to 100 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Immersed |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |