NEXT REGRIND POMH 100P-100RG

About
NEXT REGRIND POMH 100P-100RG is an Acetal (POM) Homopolymer material. It is available in North America. Important attributes of NEXT REGRIND POMH 100P-100RG are: Eco-Friendly/Green Good Processability High Viscosity Homopolymer Typical applications include: Appliances Electrical/Electronic Applications&&

Product Description
Generic	Paraformaldehyde
Material Status	Commercial: Negative
Features	Excellent Processability,High Viscosity,Homopolymer
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.40	g/cm³	ASTM D792
Melt Flow Rate	1.5	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength	62.1	MPa	ASTM D638
Tensile strain
fracture	65	%	ASTM D638
Bending modulus	2550	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	93.3	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.