NEXUS BIO BIO-110

About
Film Blowing Grade Starch Based Compostable Resin The granules are in light yellow, with slight starch fragrance, they easily absorb moisture and are easily decomposed by microbes within 90 days, are anti-static, and easily colored. The granules come in a cylindrical or round shape. The processing temperature is lower than that of conventional plastic; such granules can be directly processed into finished products without adding any other polyolefin materials like PE, PP, PS, PVC, etc. Applications include compostable packing film and compostable bags, including shopping bags, garbage bags, pet waste bags, electronic products packing bags, etc. Product certifications are: European Certificate EN13432 USA Certificate ASTM D6400&&

Product Description
Generic生物可降解聚合物
Material StatusCommercial: Active
FeaturesRenewable resources,Biodegradable,Compostable,Antistatic property,Good coloring
AvailabilitysNorth America

Technical Data
PHYSICALNominal valueUnitTest method
Density1.15 to 1.30g/cm³Internal Method
Melt Flow Rate2.0 to 5.0g/10minInternal Method
water content0.50 to 1.0%Internal Method
Biomass content> 98%Internal Method

MECHANICALNominal valueUnitTest method
tensile strength
yield> 15.0MPaInternal Method
Tensile strain
fracture> 350%Internal Method
Bending modulus1240MPaASTM D790

THERMALNominal valueUnitTest method
Vicat Softening Temp> 70.0Internal Method

Supplementary informationNominal valueUnitTest method
Degradation Rate(in 100 days)> 99%
Hexane Extraction< 4.0%Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
2. ASTM D6400/EN13432
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.