NEXUS PE LDPE-1017

About
Low Density Polyethylene for coating applications Nexus LDPE-1017 is designed for extrusion coating applications requiring high speed coating and good drawdown.&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Good dissection,Quick molding cycle
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.917	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	10	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	9.31	MPa	ASTM D638
Tensile strain
fracture	300	%	ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.