Niche PA6GF43BK

About
Niche PA6GF43BK is a Polyamide 6 (Nylon 6) material filled with 43% glass fiber. It is available in North America.&&

Product Description
Generic	PA6
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Shrinkage rate
MD	0.20	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	200	MPa	ASTM D638
Tensile strain
fracture	2.5	%	ASTM D638
Bending modulus	11000	MPa	ASTM D790
bending strength	282	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃，3.2 mm	130	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	216	℃	ASTM D648
Melting temperature	216 to 227	℃	ASTM D789

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.