Nipolon® Hard 8022

About
Nipolon® Hard 8022 is a High Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blow molding.&&

Product Description
Supplier	TOSOH
Generic	HDPE
Material Status	Commercial: Negative
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.958	g/cm³	JIS K6922-1
Melt Flow Rate
190℃，2.16kg	0.35	g/10min	JIS K6922-1
ESCR(Environmental Stress Cracking Resistance)
F50	80.0	hr	JIS K6922-2

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -80.0	℃	JIS K7216

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	70		JIS K7215
Tensile modulus	1350	MPa	JIS K6922-2
tensile strength
fracture	> 20.0	MPa	JIS K6922-2
Tensile strain
fracture	> 690	%	JIS K6922-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.