| About |
|---|
| Niuk 40NE00 is a Polyamide 6 (Nylon 6) material. It is available in Asia Pacific. Important attributes of Niuk 40NE00 are: Flame Rated Corrosion Resistant Creep Resistant Heat Resistant High Toughness Typical applications include: Engineering/Industrial Parts Electrical/Electronic Applications Automotive Housings&& |
| Product Description | |
|---|---|
| Supplier | Niuk |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,Corrosion Resistant,High Heat Resistance,Ultra high toughness,Good wear resistance,HB |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | ISO 1183 |
| Shrinkage rate | ISO 2577 | ||
| TD：3.2 mm | 1.3 to 1.5 | % | ISO 2577 |
| MD：3.2 mm | 1.5 to 1.6 | % | ISO 2577 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 45.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| fracture | 200 | % | ISO 527-2/50 |
| Bending modulus | 1200 | MPa | ISO 178 |
| bending strength | 50.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 80 | kJ/m² | ISO 179 |
| Charpy Unnotch Impact strength | |||
| 23℃ | 无断裂 | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 120 | ℃ | ISO 75-2/B |
| 1.8 MPa, unannealed | 50.0 | ℃ | ISO 75-2/A |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 1.60 mm | HB | UL 94 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 150x100x3.2 mm |
| 3. 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |