NORDEL™ IP 4785HM

About
NORDEL IP 4785HM Hydrocarbon Rubber is a high viscosity semi-crystalline grade which offers ease of processing, fast cure rates, and high states of cure with standard sulfur cure systems. It is designed for molded and extruded applications requiring high viscosities, high green strength, and high filler capacity. It is ideally suited for a wide range of extruded profiles and molded goods. It can also be peroxide cured. Main Characteristics Semi-crystalline Medium Diene levels Good Green Strength Pellet Form for Fast Mixing Low Gel Content Complies with: U.S. FDA 21 CFR 175.105: Adhesives only U.S. FDA 21 CFR 177.1210 U.S. FDA 21 CFR 177.1520(c)3.4 U.S. FDA 21 CFR 177.2600 Consult the regulations for complete details. Applications Extruded Profiles Automotive Weather Stripping Hose and Tubing Storage and Handling NORDEL IP 4785HM Hydrocarbon Rubber should be stored indoors in its original packaging. The quality of EPDM products may be affected by exposure to artificial or natural light. The polymer should be stored in a cool environment to maintain the as received pellet condition. Product Form The product is typically a pellet but may with time change into a friable bale.&&

About

NORDEL IP 4785HM Hydrocarbon Rubber is a high viscosity semi-crystalline grade which offers ease of processing, fast cure rates, and high states of cure with standard sulfur cure systems. It is designed for molded and extruded applications requiring high viscosities, high green strength, and high filler capacity. It is ideally suited for a wide range of extruded profiles and molded goods. It can also be peroxide cured. Main Characteristics Semi-crystalline Medium Diene levels Good Green Strength Pellet Form for Fast Mixing Low Gel Content Complies with: U.S. FDA 21 CFR 175.105: Adhesives only U.S. FDA 21 CFR 177.1210 U.S. FDA 21 CFR 177.1520(c)3.4 U.S. FDA 21 CFR 177.2600 Consult the regulations for complete details. Applications Extruded Profiles Automotive Weather Stripping Hose and Tubing Storage and Handling NORDEL IP 4785HM Hydrocarbon Rubber should be stored indoors in its original packaging. The quality of EPDM products may be affected by exposure to artificial or natural light. The polymer should be stored in a cool environment to maintain the as received pellet condition. Product Form The product is typically a pellet but may with time change into a friable bale.&&

Product Description
Supplier	DOW
Generic	EPDM+SEBS
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.880	g/cm³	ASTM D297
Mooney viscosity
ML 1+4，125℃	85	MU	ASTM D1646
Ethylene composition	68.0	wt%	ASTM D3900
Ethylidene norbornene content	4.9	wt%	ASTM D6047
Ash Content	< 0.1	%	ASTM D296
molecular weight distribution	Medium		Internal Method
Propylene content	27.1	wt%	ASTM D3900
Residual Transition Metal	< 10	ppm	Internal Method
Total Volatiles	0.4	wt%	Internal Method

Notes
1. Adhesives only
2. The product is typically a pellet but may with time change into a friable bale.
3. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.