| About |
|---|
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PPO(PPE)+PS |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile Strength | |||
| Yield yld | 58 | MPa | ASTM D638 |
| Tensile Strain | |||
| Broken BRK | 30 | % | ASTM D638 |
| Flexural Strength | |||
| Yield yld | 93 | MPa | ASTM D790 |
| Flexural Modulus | 2420 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | |||
| 23℃ | 208 | J/m | ASTM D256 |
| -40℃ | 133 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.8 MPa，6.4 mm | 126 | ℃ | ASTM D648 |
| 1.8 MPa，3.2 mm | 117 | ℃ | ASTM D648 |
| Coeff. of linear thermal expansion | |||
| MD：23~80℃ | 1.3E-04 | 1/℃ | ASTM E831 |
| Relative Temperature Index (RTI) | |||
| Non mechanical impact performance str | 105 | ℃ | UL 746B |
| Impact mechanical performance Imp | 90 | ℃ | UL 746B |
| Electrical performance Elec | 105 | ℃ | UL 746B |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.08 | g/cm³ | ASTM D792 |
| Water Absorption | |||
| 24hr | 0.06 | % | ASTM D570 |
| Molding shrinkage | |||
| MD | 0.5 – 0.7 | % | Internal Method |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Dissipation Factor | |||
| 50-60 Hz | 2.65 | ASTM D150 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Drying Temperature | 105 – 110 | °C | |
| Drying Time | 2 – 4 | hrs | |
| Drying Time | 8 | hrs | |
| Melt Temperature | 280 – 310 | °C | |
| Mold Temperature | 70 – 95 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |