| About |
|---|
| NORYL GFN1720是一种20%的玻璃纤维增强的改性聚苯醚树脂，通过注射成型，这种改性聚苯醚树脂是旨在提供的热、 强度和电气性能的平衡。NORYL GFN1720有多种颜色可供选择，可用在点火线圈，线轴和其他电绝缘材料的优秀替代选择。 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PPO(PPE) |
| Material Status | Commercial: Active |
| Features | Glass fiber reinforced |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Taber wear and tear | |||
| CS-17，1kg | 45 | mg/1000cy | Internal Method |
| tensile strength | |||
| Yield, 50 mm/min | 90 | MPa | ISO 527 |
| Fracture, 50 mm/min | 90 | MPa | ISO 527 |
| Tensile strain | |||
| Yield, 50 mm/min | 2 | % | ISO 527 |
| Fracture, 50 mm/min | 2 | % | ISO 527 |
| Tensile modulus | |||
| 1 mm/min | 6000 | MPa | ISO 527 |
| bending strength | |||
| Yield, 2 mm/min | 135 | MPa | ISO 178 |
| Bending modulus | |||
| 2 mm/mim | 4500 | MPa | ISO 178 |
| Ball hardness | |||
| H358/30 | 100 | MPa | ISO 2039-1 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 60 | J/m | ASTM D256 |
| -30℃ | 50 | J/m | ASTM D256 |
| Total energy of instrument impact | |||
| 23℃ | 14 | J | ASTM D 3763 |
| Notched impact strength of cantilever beam | |||
| 23℃，80*10*4 | 25 | kJ/m² | ISO 180/1U |
| -30℃，80*10*4 | 25 | kJ/m² | ISO 180/1U |
| Charpy Notched Impact Strength | |||
| 80 * 10 * 3, 62mm span | |||
| 23℃ | 25 | kJ/m² | ISO 179/1eU |
| -30℃ | 25 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 181 | ℃ | ASTM D1525 |
| Hot deformation temperature | |||
| 0.45 MPa, 100 mm span | 170 | ℃ | ISO 75/Be |
| 1.8 MPa, 100 mm span | 160 | ℃ | ISO 75/Be |
| 1.8 MPa, unannealed, 3.2 mm | 171 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD：-40~40℃ | 4.E-05 | 1/℃ | ASTM E831 |
| TD：-40~40℃ | 5.E-05 | 1/℃ | ASTM E831 |
| Thermal conductivity coefficient | 0.26 | W/m/℃ | ISO 8302 |
| Linear coefficient of thermal expansion | |||
| MD：23~80℃ | 3.E-05 | 1/℃ | ISO 11359-2 |
| TD：23~80℃ | 7.E-05 | 1/℃ | ISO 11359-2 |
| Ball pressure test | |||
| 125℃±2℃ | PASSES | IEC 60695-10-2 | |
| Maximum approximation value | 165 | ℃ | IEC 60695-10-2 |
| Vicat Softening Temp | |||
| A50 | 180 | ℃ | ISO 306 |
| B50 | 170 | ℃ | ISO 306 |
| B120 | 180 | ℃ | ISO 306 |
| Relative temperature index | |||
| Electrical performance | 65 | ℃ | UL 746B |
| Impact mechanical performance | 65 | ℃ | UL 746B |
| Non mechanical impact performance | 65 | ℃ | UL 746B |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.24 | ASTM D792 | |
| Shrinkage rate | |||
| On the stretching rod, MD | 0.2 – 0.4 | % | Internal Method |
| MD：3.2 mm | 0.2 – 0.4 | % | Internal Method |
| Melt Flow Rate | |||
| 300℃，5.0kg | 4.5 | g/10min | ASTM D1238 |
| Density | 1.24 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.15 | % | ISO 62 |
| 23℃，50% RH | 0.06 | % | ISO 62 |
| Melt Volume Rate | |||
| 300℃，10 kg | 11 | cm³/10min | ISO 1133 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.E+15 | ohms·cm | IEC 60093 |
| Surface resistivity | |||
| ROA | > 1.E +15 | ohms | IEC 60093 |
| Dielectric strength | |||
| In oil | |||
| 0.8 mm | 30 | kV/mm | IEC 60243-1 |
| 1.6 mm | 26 | kV/mm | IEC 60243-1 |
| 3.2 mm | 16 | kV/mm | IEC 60243-1 |
| Relative permittivity | |||
| 1 MHz | 2.6 | EC 60250 | |
| 50-60 Hz | 2.7 | EC 60250 | |
| Dissipation factor | |||
| 50-60 Hz | 0.006 | EC 60250 | |
| 1 MHz | 0.002 | EC 60250 | |
| Compared to the leakage tracing index | 200 | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 94HB flame rating assessment | 1.5 | mm | UL 94 |
| 94HB flame level second reference value | 3 | mm | UL 94 |
| Glowing wire flammability index | |||
| 960 ℃, passed through | 3.2 | mm | IEC 60695-2-12 |
| Extreme oxygen index | |||
| LOI | 23 | % | ISO 4589 |
| Process Conditions | |||
|---|---|---|---|
| injection molding | Nominal value | Unit | Test method |
| Drying time | 110 – 120 | °C | |
| Drying temperature | 2 – 4 | hrs | |
| Melt temperature | 290 – 330 | °C | |
| Nozzle temperature | 290 – 310 | °C | |
| Front Zone 1 Temperature | 310 – 330 | °C | |
| Temperature in Zone 2 of the middle section | 290 – 310 | °C | |
| Temperature in Zone 3 of the rear section | 270 – 290 | °C | |
| Hopper temperature | 60 – 80 | °C | |
| Mold temperature | 80 – 120 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |